New Electrical Installation in Bali

What We Do

We provide complete electrical installation in Bali for new villa builds, apartments, renovations and room additions. That means planning the circuit layout from the start, installing correctly rated cable, connecting everything to the panel with proper MCB protection, and earthing the whole system to a verified copper rod. A villa wired this way runs cool, never trips for no reason, and is safe to add load to later. It is the opposite of the cut-corner wiring we are so often called back to repair.

What's Included

• Circuit layout and load planning based on your actual appliances and AC count
• First-fix: conduit and correctly sized cable run in walls, ceilings and slab
• Second-fix: outlets, switches, light fittings and the distribution panel
• A new MCB/RCBO panel with each circuit individually protected and labelled
• A driven copper earth rod, bonded and verified with an earth-resistance meter
• Full testing and a 12-month workmanship warranty

How We Size It Properly

The heart of a good installation in Bali's climate is correct cable sizing. We use roughly 1.5mm² for lighting, 2.5mm² for general socket circuits, and 4mm² or larger for heavy loads like water heaters, AC condensers and pool pumps. Heavy appliances get their own dedicated circuit and MCB rather than sharing — the shared-circuit shortcut is exactly why so many villas trip when the kettle and the water heater run together.

How We Work — Step by Step

1. Plan. We review your layout, appliance list and AC requirements and design the circuits and panel accordingly.
2. First-fix. During construction we run conduit and cable in the walls and slab before plastering.
3. Panel & earthing. We install and label the distribution board and drive a verified earth rod.
4. Second-fix. Once tiling and paint are done we fit outlets, switches and light fittings.
5. Test & hand over. Every circuit is tested under load, then documented and warrantied.

Common Bali Installation Jobs

Typical work includes wiring a new two- or three-bedroom villa from scratch, adding circuits when a garage is converted to a guest room, re-wiring an older villa whose original installation has become unsafe, and adding dedicated AC and water-heater circuits during a renovation. We coordinate with your builder so the electrical first-fix happens at the right point in the schedule.

Pricing

Full room electrical from IDR 2,500,000, new circuit from IDR 800,000, AC wiring from IDR 600,000, water heater wiring from IDR 500,000 — labour only, materials quoted upfront. See full pricing →

Typical Time

From one day for a single room up to several days for a full villa, split across first-fix and second-fix to match the build schedule.

Related Services

Adding heavy load may need an MCB panel upgrade or a PLN power upgrade first. We also handle lighting installation as part of a fit-out, and repair and fault finding on existing wiring.

Mini-FAQ

All Bali Areas

We cover Canggu, Seminyak, Ubud, Kuta, Legian, Denpasar, Sanur, Jimbaran, Nusa Dua and Uluwatu. No travel surcharge. Full service area →